MAINTENANCE WORK ON FRAME AND ENGINE 88
To reactivate ABS, stop the vehicle and switch off the ignition. ABS is reactivated when the
vehicle is started up again. The ABS warning lamp goes out after you start riding.
Button can be used to switch the ABS off manually (see Starting).
9.23Checking the brake discs
Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
– Change the worn brake disc(s) without delay. (Your authorized KTM workshop will be glad to help.)
400618-10
– Check the thickness of the front and rear brake discs in several places to ensure that it
conforms to measurement .
Info
Wear reduces the thickness of the brake disc in area of the brake disc.
Brake discs - wear limit
Front 4.5 mm (0.177 in)
Brake disc - wear limit
Rear 4.5 mm (0.177 in)
» If the brake disc thickness is less than the specified value:
– Change the brake disc.
– Check the front and rear brake discs for damage, cracks and deformation.
» If damage, cracks or deformation are visible on the brake disc:
– Change the brake disc.
To Next Page
Loading...
Need help?
General
