MAINTENANCE WORK ON FRAME AND ENGINE 69
Info
Turn clockwise to increase damping, turn counterclockwise to reduce suspension
damping.
– Mount protection covers .
9.7Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork rebound behavior.
100534-10
– Turn adjusting screws clockwise until they stop.
Info
The adjusting screws are located at the top end of the fork legs.
Make the same adjustment on both fork legs.
– Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
(990 Adventure)
Rebound damping
Comfort 23 clicks
Standard 18 clicks
Sport 13 clicks
Full payload 13 clicks
To Next Page
Loading...
Need help?
General
