TRANSMISSION
L3560, L4060, L4760, L5060, L5460, L6060, WSM
3-S58
6. DISASSEMBLING AND ASSEMBLING
[1] MANUAL TRANSMISSION
(1) Clutch Housing
Hydraulic Pipe
1. Remove the front loader pipes (1).
2. Disconnect the suction pipe (4).
3. Remove the main delivery pipe (2) and PTO delivery pipe (3).
(When reassembling)
9Y1210824TRS0009US0
Separating Engine and Clutch Housing
1. Place the disassembling stands under the engine and clutch
housing.
2. Remove the engine and clutch housing mounting screws and
nuts.
3. Separate the engine and clutch housing.
(When reassembling)
• Apply grease to the spline of clutch shaft.
• Apply liquid gasket (Three Bond 1211 or equivalent) to joint face
of the flywheel housing and clutch housing.
9Y1210824TRS0010US0
Tightening torque
Joint bolt for main delivery
pipe
118 to 137 N·m
12.0 to 14.0 kgf·m
86.8 to 101 lbf·ft
Joint bolt for PTO delivery
pipe
35 to 39 N·m
3.5 to 4.0 kgf·m
26 to 28 lbf·ft
Front loader pipe retaining
nut
90.0 to 108 N·m
9.18 to 11.0 kgf·m
66.4 to 79.6 lbf·ft
(1) Front Loader Pipe
(2) Main Delivery Pipe 1
(3) PTO Delivery Pipe
(4) Suction Pipe
Tightening torque
Engine and clutch housing
mounting screw
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
Engine and clutch housing
mounting nut
103 to 117 N·m
10.5 to 12.0 kgf·m
76.0 to 86.7 lbf·ft
To Next Page
Loading...
Need help?
General