CABIN
L3560, L4060, L4760, L5060, L5460, L6060, WSM
10-S29
(8) Compressor Relay
Compressor Relay Checking
1. Remove the panel cover (1).
2. Remove the electronic instrument panel (2). from panel frame
(3).
3. Disconnect the panel connector (4).
4. Remove the compressor relay (5).
5. Apply battery voltage across terminals 1 and 2, and check for
continuity across terminals 3 and 4.
6. If continuity is not established, across the terminal 3 and 4,
replace it.
9Y1210824CAS0062US0
(1) Panel Cover
(2) Electronic Instrument Panel
(3) Panel Frame
(4) Panel Connector
(5) Compressor Relay
(6) Connector (Relay)
(7) Battery