TRANSMISSION
L3560, L4060, L4760, L5060, L5460, L6060, WSM
3-S64
(2) Mid Case
Hydraulic Pipe
1. Remove the front loader pipes (1).
2. Disconnect the suction pipe (4).
3. Remove the main delivery pipe (2) and PTO delivery pipe (3).
(When reassembling)
9Y1210824TRS0009US0
Main Shift Lever and Brake Rods
1. Tap out the spring pins (1) of main shift rod (2).
2. Remove the main gear shift lever (4) with the support (3).
3. Remove the brake rod (5).
(When reassembling)
• Tap in the spring pins (1) so that their split portion may face
forward.
9Y1210824TRS0020US0
Separating Mid Case and Transmission Case
1. Remove the brake rod (1).
2. Separate the mid case and transmission case after removing
their mounting screws.
(When reassembling)
• Make sure to insert the PTO shaft to PTO clutch firmly, turning
the PTO shaft.
• Apply liquid gasket (Three Bond 1208C or equivalent) to joint
face of the mid case and transmission case.
9Y1210824TRS0021US0
Tightening torque
Joint bolt for main delivery
pipe
118 to 137 N·m
12.0 to 14.0 kgf·m
86.8 to 101 lbf·ft
Joint bolt for PTO delivery
pipe
35 to 39 N·m
3.5 to 4.0 kgf·m
26 to 28 lbf·ft
Front loader pipe retaining
nut
90.0 to 108 N·m
9.18 to 11.0 kgf·m
66.4 to 79.6 lbf·ft
(1) Front Loader Pipe
(2) Main Delivery Pipe 1
(3) PTO Delivery Pipe
(4) Suction Pipe
(1) Spring Pin
(2) Main Shift Rod
(3) Support
(4) Main Gear Shift Lever
(5) Brake Rod
Tightening torque
Mid case and transmission
case mounting screw
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
Mid case and transmission
case mounting nut
103 to 117 N·m
10.5 to 12.0 kgf·m
76.0 to 86.7 lbf·ft
(1) Brake Rod
To Next Page
Loading...
Need help?
General