TRANSMISSION
L3560, L4060, L4760, L5060, L5460, L6060, WSM
3-M40
5. PTO SYSTEM
[1] STRUCTURE
The independent PTO operated by hydraulic clutch (3) is adapted for all models. PTO is "ENGAGED" or
"DISENGAGED" by operating the PTO switch of the PTO solenoid valve.
The power train from the clutch to the PTO shaft is shown in figure above.
(Reference)
• PTO speed of each model is as shown in the table below.
Manual Transmission and GST
HST
9Y1210824TRM0047US0
(1) PTO Gear Shaft 1
(2) PTO Gear Shaft 2
(3) PTO Clutch Pack
(4) PTO Counter Shaft
(5) PTO Drive Shaft
(6) PTO Shaft
(7) Output Shaft (Motor Shaft)
(8) PTO Gear Shaft 1
(9) PTO Gear Shaft 2
[A] Manual Transmission and
GST
[B] HST
Rear PTO All Model 540 min
-1
(rpm) at 2550 min
-1
(rpm) engine speed
Rear PTO
L3560 540 min
-1
(rpm) at 2426 min
-1
(rpm) engine speed
L4060, L4760 540 min
-1
(rpm) at 2476 min
-1
(rpm) engine speed
L5460, L6060 540 min
-1
(rpm) at 2403 min
-1
(rpm) engine speed
To Next Page
Loading...
Need help?
General