ELECTRICAL SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
9-S26
(8) Mode "G" (GST Shift Shock Fine-adjustment Mode) Adjusting the Clutch
Engaging Interval
• Perform Mode G for adjusting the GST shifting shock.
1. While holding down the display mode switch, start the engine.
2. Mode selection display (a) is indicated on the LCD.
3. Press the display mode switch and the buzzer rings and marked
display moves.
4. Select the Mode "G".
5. Hold down the display mode switch for more than 2 seconds.
6. "GST Shift Shock Fine-adjustment Mode 0" is displayed (b).
The number "−9" through "+9" can be displayed.
This has been factory-adjustment to "0".
7. Each time pressing the display mode switch, the number on the
display changes.
8. Setting
• Select the GST shifting shock feeling number.
• For higher shifting shock; Press the display mode switch to
increase the number.
• For lighter shifting shock; Press the display mode switch to
reduce the number.
9. Move the tractor to make sure the shifting shock feeling.
10. Turn off the main switch.
9Y1210824ELS0018US0
(9) Mode "J" (Speed Unit Selection Mode) Input the Traveling Speed Unit to
the Electronic Instrument Panel
• When the Intellipanel is replaced, this adjustment is
required.
1. While holding down the display mode switch, turn on the main
switch.
2. Mode selection display (a) is indicated on the LCD.
3. Press the display mode switch and the buzzer rings and marked
display moves.
4. Select the Mode "J".
5. Hold down the display mode switch for more than 2 seconds.
6. "Speed Unit km/h mph" is displayed (b).
To select km/h or mph unit, press the display mode switch.
7. Hold down the display mode switch for more than 2 seconds at
the desired unit.
8. "OK" is displayed (c).The speed unit has been input correctly.
9. If "NG" is displayed: The speed unit has not been input
correctly.
Repeat the procedure.
10. Turn off the main switch.
9Y1210824ELS0019US0
(a) Mode Selection Display (b) Setting Display
(a) Mode Selection Display
(b) Setting Display
(c) Correct Preserving Display