ELECTRICAL SYSTEM
L3560, L4060, L4760, L5060, L5460, L6060, WSM
9-S80
(6) EGR Valve
• Since it is not possible to do unit checking for this sensor, judge the sensor is faulty if the relating electric
circuit is normal.
9Y1210824ELS0111US0
Connector Voltage
1. Disconnect the connector, and turn the main key switch "ON"
position.
2. Measure the voltage with a voltmeter across the terminals
shown in the table below.
3. If the reference value is not indicated as shown in the table
below, check the relating electric circuit.
9Y1210824ELS0112US0
Voltage
Main switch at
"ON"
Terminal 1 –
chassis
Approx. battery
voltage
(1) EGR Valve
(2) Connector (Harness Side)
[A] L3560
[B] except L3560
To Next Page
Loading...
Need help?
General