Kubota WSM L5460 User Manual

STEERING
L3560, L4060, L4760, L5060, L5460, L6060, WSM
7-S5
5. DISASSEMBLING AND ASSEMBLING
[1] STEERING CONTROLLER
IMPORTANT
• Use only the transmission fluid (see page G-9.), in no case use mixture of oils of different brands.
• Before disassembling the power steering system hydraulic components, check the performance of
hydraulic pump and power steering using a flowmeter.
• After removing or disassembling the power steering hydraulic components, be sure to bleed air.
[Bleeding]
1. Start the engine.
2. Turn the steering wheels slowly in both directions all the way alternately several times, and stop the engine.
9Y1210824STS0005US0
Steering Joint Cover and Steering Joint Shaft
1. Pull down the knob and open the bonnet.
2. Remove the front grill (1).
3. Remove the steering joint cover (2).
4. Remove the steering joint screw (5) and the steering joint
support (4).
5. Remove the steering joint shaft (3).
(When reassembling)
• Tighten the steering joint shaft support mounting screw after
adjusting the position of steering joint shaft support (4) for
smooth rotation of the steering wheel.
9Y1210824STS0006US0
Steering Controller Assembly
1. Disconnect the power steering delivery pipe (4), steering hoses
(2), (3) and return hose (5).
2. Remove the steering controller mounting screw (6) and steering
controller assembly (1).
(When reassembling)
• Reinstall the steering hoses (2), (3) to their original position.
9Y1210824STS0007US0
(1) Front Grill
(2) Steering Joint Cover
(3) Steering Joint Shaft
(4) Steering Joint Shaft Support
(5) Steering Joint Screw
Tightening torque
Power steering delivery
pipe retaining nut
49 to 58 N·m
5.0 to 6.0 kgf·m
37 to 43 lbf·ft
Power steering hose
retaining nut
25 to 29 N·m
2.5 to 3.0 kgf·m
18 to 21 lbf·ft
(1) Steering Controller
(2) Steering Hose RH
(3) Steering Hose LH
(4) Power Steering Delivery Pipe
(5) Return Hose
(6) Screw
KiSC issued 03, 2016 A

Kubota WSM L5460 Specifications

General

Brand	Kubota
Model	WSM L5460
Category	Tractor
Language	English