TRANSMISSION
L3560, L4060, L4760, L5060, L5460, L6060, WSM
3-S115
Hydraulic Pipe
1. Remove the front loader pipes (4).
2. Disconnect the suction hose (1) and suction pipe (6).
3. Remove the main delivery pipe (3), power steering delivery pipe
(2) and delivery pipe (5).
(When reassembling)
9Y1210824ENS0023US0
Hydraulic Pipe and Wiring Harness
1. Disconnect the speed sensor connector (1).
2. Disconnect the PTO clutch valve connector (2).
3. Disconnect the proportional valve connector (3).
4. Remove the brake rod R.H. (5).
5. Remove the PTO delivery pipe (4).
6. Disconnect the solenoid valve connector (7).
7. Set aside the main wiring harness (6) to the front.
9Y1210824TRS0112US0
Tightening torque
Front loader pipe retaining
nut
90.0 to 108 N·m
9.18 to 11.0 kgf·m
66.4 to 79.6 lbf·ft
Joint bolt for main delivery
pipe
40 to 49 N·m
4.0 to 4.9 kgf·m
29 to 36 lbf·ft
Joint bolt for delivery pipe
40 to 49 N·m
4.0 to 4.9 kgf·m
29 to 36 lbf·ft
(1) Suction Hose
(2) Power Steering Delivery Pipe
(3) Main Delivery Pipe
(4) Front Loader Pipe
(5) Delivery Pipe
(6) Suction Pipe
Tightening torque
Joint bolt for PTO delivery
pipe
35 to 39 N·m
3.5 to 4.0 kgf·m
26 to 28 lbf·ft
Joint bolt for HST return
pipe
88 to 98 N·m
9.0 to 9.9 kgf·m
65 to 72 lbf·ft
(1) Speed Sensor Connector
(2) PTO Clutch Valve Connector
(3) Proportional Valve Connector
(4) PTO Delivery Pipe
(5) Brake Rod R.H.
(6) Main Wiring Harness
(7) Solenoid Valve Connector
To Next Page
Loading...
Need help?
General