About X-431 Station
DiagnosticsToolbox & AppsFAQ
Initial Use
11
www.x431.com +86 755 8455 7891
LAUNCH
Station
User's Guide
Item Description
Working voltage DC 9V ~ 36V
RAM 256MB
ROM 8GB
USB Type B x 1
Bluetooth Bluetooth 4.0 dual module
WiFi 2.4G/5GHz dual frequency
1.5.4 ROXIE W (Optional)
ROXIE W is an evolutionary smart plug & play solution which is specialized on automotive diagnostics.
Users can achieve full vehicle system diagnosis without any operation, just simply plug the device into the
vehicle’s DLC(Data Link Connector) directly and then keep the vehicle ignition key on.
After diagnosis is completed, a diagnostic report will be generated on the ROXIE W
device and sent to the
registered email address automatically (if bound). In addition, user also can view the diagnostic reports on
the LAUNCH-specic diagnostic tool (such as X-431 Station) that binds the ROXIE device.
ROXIE W has the following functions and advantages:
• Support auto sign-up
• Smart(Auto-Detect) Diagnosis: Once the device and the vehicle are properly connected, the system
starts auto-detect process. Once the whole diagnostic session is successfully finished, a diagnostic
report will be automatically generated and sent to your email box (if bound)
• Support intelligent audio prompt of whole diagnosis process and diagnostic result
• Support email address conguration and report review
• Support subscription renewal for unlimited service
• Provide the ability to assign itself to execute the specic diagnostic operation (such as OBD only, Data
stream included/not included).
• Update via Wi-Fi: Let you update your diagnostic software and system online.
Note: For initial use, the test report generated by ROXIE W cannot be directly pushed to the mobile diagnostic
center. The user needs to bind the ROXIE W device to the X-431 Station user account first. Only after it is
successfully bound, the test report can be synchronized to the mobile diagnostic center and reminded. For specific
binding operations, please refer to Chapter "User Info".