Leica GPS1200 User Manual

164 GPS1200 Config...\Interfaces... - Controlling
Devices
22.4 Hidden Point Measurement Devices
Description Hidden point measurement devices can be used to measure distances, angles and
azimuths to points which are not accessible by means of GPS. A Bluetooth housing
can be used to provide a wireless connection between the receiver and a Bluetooth
enabled hidden point measurement device.
Access Refer to "22.1 Accessing Config...\Interfaces... - Controlling Devices" to access
CONFIGURE RS232 Connection.
CONFIGURE
RS232 Connection
Description of fields
CONT (F1)
To accept the changes and to
continue with the subsequent
screen.
SRCH (F4)
Available for <Bluetooth: Yes>. To
search for all available Bluetooth
devices.
Field Option Description
<Type:> Output The type of hidden point measurement device
highlighted when CONFIGURE RS232
Connection was accessed.
<Bluetooth:> Output GPS1200 receivers detect automatically if the
attached devices is bluetooth capable. Some
devices ask for the identification number of the
Bluetooth. The identification number of Leica’s
Bluetooth is 0000. The field is unavailable for
RX1250 with SmartAntenna.
<ID
Address:>
User input Available for <Bluetooth: Yes>. The ID address
of the Bluetooth device to be used. Refer to the
device’s user manual for information about the
ID address.

Leica GPS1200 Specifications

General

Brand	Leica
Model	GPS1200
Category	Receiver
Language	English