Leica GPS1200 User Manual

106 GPS1200 Config...\Survey Settings...
17.5 Logging of Raw Obs
Description Logged raw observations are used for
• static and kinematic operations. With these operations, raw data is always post-
processed in the office. Raw data must therefore be logged on both reference
and rover receivers.
• real-time operations
to check the work in the office by post-processing.
OR
to fill in gaps when a real-time position could not be calculated in the field.
This can happen due to problems with the real-time data reception.
Observations must be logged on all receivers which will be used for post-processing.
Access Select Main Menu: Config...\Survey Settings...\Logging of Raw Obs.
CONFIGURE
Logging of Raw
Obs
Description of fields
CONT (F1)
To accept changes and return to the
screen from where this screen was
accessed.
FILES (F6)
Available unless <Log Raw Obs:
Never> or <Log Raw Obs: No>. To
configure the files for raw observa-
tions.
Field Option Description
<Log Raw
Obs:>
Never, Static
Only or Static &
Moving
Available unless <R-Time Mode: Reference>.
Determines if raw observation are logged and
during what circumstances they are logged.
If Radio Down Available for <R-Time Mode: Rover>. Contin-
uous raw observation logging during static and
moving intervals when no real-time corrections
are being received by a receiver.
Yes or No Available for <R-Time Mode: Reference>.
Determines if the reference logs raw observa-
tions.
<Log After:> User input Available for <Log Raw Obs: If Radio Down>.
Raw data logging begins after the specified time
if radio contact is lost.
<For
Minimum:>
User input Available for <Log Raw Obs: If Radio Down>.
Raw data logging continues for the specified
time, also after the radio link is regained.

Leica GPS1200 Specifications

General

Brand	Leica
Model	GPS1200
Category	Receiver
Language	English