Leica GPS1200 User Manual

STATUS GPS1200 193
24.3 STATUS: System Information
Access
STATUS
System Informa-
tion, Instrument
page
Shows the type of receiver, the serial number, the equipment number, the ID of the
receiver, the currently active system language, the serial number of the measure-
ment engine, the availability of additional instrument hardware options such as event
input, L2C, Multipath Mitigation, GLONASS ready, GLONASS permanent and if the
protected OWI commands have been activated by a licence key.
Next step
PAGE (F6) changes to the Firmware page.
STATUS
System Informa-
tion, Firmware
page
Shows the versions of all system firmware.
Description of fields
Next step
PAGE (F6) changes to the Application page.
STATUS
System Informa-
tion, Application
page
Shows the versions of all uploaded application programs.
Next step
CONT (F1) exits STATUS System Information.
Step Description
1. Press USER to access GPS1200 User Menu.
2. Press STAT (F3) to access STATUS Status Menu.
3. Select System Information.
Field Description
<Firmware:> The firmware version of the onboard software.
<Build:> The build version of the firmware.
<Maintenance
End:>
The expiry date of the contract is shown.
<Meas Engine:> The firmware version for the measurement engine.
<Meas Eng Boot:> The firmware version of the boot software for the measure-
ment engine.
<Boot:> The firmware version of the boot software.
<LB2/OWI:> The firmware version for the communication.
<Navigation:> The navigation firmware version with the algorithms for the
signal processing.
<API:> The firmware version for the application program interface.
<EF Interface:> The firmware version for the electric front interface.

Leica GPS1200 Specifications

General

Brand	Leica
Model	GPS1200
Category	Receiver
Language	English