Equipment Setup GPS1200 21
2 Equipment Setup
2.1 Receiver Ports
Description All receiver ports on the GPS1200 are located on the receiver front panel.
Ports at the
receiver front panel
GX1210, GX1220, GX1220 GG, GX1230, GX1230 GG, GX1200 with PPS/Event
option, GRX1200 Classic and GRX1200 Lite
Ports to connect
equipment
a) Port E2: Event input 2, on GX1200 with
PPS/Event option
g) Port ANT: GNSS antenna in.
b) Port E1: Event input 1, on GX1200 with
PPS/Event option
h) Battery compartment B, not for
GRX1200 Pro/GRX1200 GG Pro
c) Battery compartment A
with CompactFlash card compartment
i) Port PPS: PPS output, on GX1200
with PPS/Event option
d) LED indicators j) Port RX: RX1200 in/out or remote
interface in/out.
8 pin LEMO
e) Port P3: Power out, data in/out, or
remote interface in/out. 8 pin LEMO
k) Port P2: Power out, data in/out, or
remote interface in/out. 8 pin LEMO
f) Port PWR: Power in. 5 pin LEMO l) Port P1: Power out, data in/out, or
remote interface in/out. 8 pin LEMO
a
b
c
d
e
f
g
h
i
j
k
l
GPS12_001a
P
3
P
W
R
P
P
S
R
X
P
2
P
1
A
N
T
E1 E2
Equipment Port
RX1210 without cable Direct clip on the receiver
RX1210 using a cable Port RX
GNSS antenna Port ANT
Radio in a housing, without cable Port P1 or port P3
Radio without housing, using a cable Port P1, port P2 or port P3
Radio in a System 500 housing, using a cable Port P1, port P2 or port P3
External power Port PWR
To Next Page
Loading...
Need help?
General
