Manage...\Jobs GPS1200 45
Next step
PAGE (F6) changes to the Codelist page.
MANAGE
XX Job,
Codelist page
Description of fields
Next step
PAGE (F6) changes to the Coord System page.
MANAGE
XX Job,
Coord System
page
Choosing a coordinate system attaches it to the job. If it is not known which coordi-
nate system to use, select <Coord System: WGS 1984 >.
All other fields on this screen are output fields. They depend on the transformation
type of the selected coordinate system.
Next step
PAGE (F6) changes to the Avge page.
IMPRT (F2)
Available for editing a job. To add
additional codes from a new codelist
to the job. The name of this codelist is
copied to the job.
CODES (F4)
Available for editing a job. To view,
edit, delete, sort and group codes
currently stored in the job. The func-
tionality of this screen is mainly the
same as for MANAGE Codes.
DATA (F5)
To view, edit and delete points, lines
and areas stored with the job. Points,
lines and areas are shown on sepa-
rate pages. Selected sort and filter
settings apply.
SHIFT EXPRT (F2)
Available for editing a job. To copy
codes from the job to an existing or
new codelist.
Field Option Description
<Codelist:> Choicelist Available for creating a new job or for editing a
job if no codes are stored in the job. Choosing a
codelist copies the codes to the job.
Output Available for editing a job if codes are stored in
the job. If codes had been copied from a System
RAM codelist, then the name of the codelist is
displayed. If codes have not been copied from a
System RAM codelist but typed in manually,
then the name of the active job is displayed.
To Next Page
Loading...
Need help?
General
