16 Information SET-01
5.2 The function menu of LH100
The LH100 function menu provides you access to all other functions
of the LH100.
The different menu items can be reached in 2 different ways when
you are in the locomotive control mode:
Option 1:
Press and scroll through
the menus with
until you reach the desired
menu
Option 2 (Quick access):
Press and then the number of the desired function. The
corresponding numbers can be found in the detailed
description of each function.
Following is a brief description of each of the individual LH100 menu
items.
5.2.1 Setting locomotive decoder functions to on/off or momentary
function
Each individual function between F1 and F12 can be configured on a
per locomotive basis to either be on/off or momentary. In on/off
operation the function is turned on with one keystroke and turned off
with the next keystroke. In momentary operation the function is only
turned on for as long as you keep the corresponding key pressed.
When you release the key again, the corresponding function turns
off again.
The procedure for setting this is described in "Configuring
locomotive decoder functions" starting on page (ðp.30 ).
5.2.2 Double header
Double heading allows you to easily assign two locomotives to a
double header and then operate it as a single locomotive from either
locomotive address. The procedure for setting this is described in
"Double herder" starting on page (ðp.32 ).
To Next Page
Loading...
Need help?
General
