Lenz Digital plus SET-01/4 User Manual

Information SET-01 9
DIGITAL plus
3.2 Operating Your first Train
For this example we will assume that you are using a locomotive
with the address 3.
3.2.1 Selecting the locomotive address:
To operate a locomotive you must first enter the address of the
locomotive into the LH100:
Press On the display you see Explanation
First clear the display, and begin
entering the address
The number keyed in is displayed. If
you keyed in the wrong number, you
can clear the last entered digit with
‘CL’. You do not need to enter leading
0s of an address
You end the data entry with ‘Enter’.
The direction of travel and the status
of the functions for this particular
locomotive will now be displayed. In
this example the direction of travel is
forward (arrow on left points up),
the functions 0 (light symbol), F1, F3
and F8 are activated.
3.2.2 Controlling the locomotive's speed:
The speed of travel of the locomotive is controlled with any one of
the four following operation keys.
If you press any one of these keys and keep it pressed, the speed
steps will automatically be increased (or decreased) until the
maximum upper speed limit (or speed step 0) is reached.

Lenz Digital plus SET-01/4 Specifications

General

Brand	Lenz
Model	Digital plus SET-01/4
Category	Control Unit
Language	English