Lenz Digital plus SET-01/4 User Manual

28 Information SET-01
8 Emergency stop and emergency off
In this section you will learn about:
- the function of the key.
- how to turn off track power
- changing information during an emergency stop
The 'St' key tells the system to perform an emergency stop. You
can program this key to have two different effects:
Emergency stop Emergency off
the locomotives are
stopped, but the track
power remains on
OR
the power on the track is
shut off
alternating with
(flashes)
The factory default is emergency stop, that is all the locomotives are
stopped with track power remaining on. How you program the ‘St’
key is described in section "".
8.1 Turning off the track power
If an emergency stop has been triggered, you can still turn off the
power to the track:
Press On the display you see Explanation
Call up the locomotive address
whose function setting you want to
display or change
alternates with
The emergency stop is displayed.
The display “OFF FO” is designed to
remind you of the key stroke
sequence needed to turn off the
track power:

Lenz Digital plus SET-01/4 Specifications

General

Brand	Lenz
Model	Digital plus SET-01/4
Category	Control Unit
Language	English