Lexmark C543dn Service Manual

4-26 Service Manual
5025-2xx, 4xx
Go Back
Previous
Next
Replace the two screws (B).
2. Be sure the shaft and bearing have not shifted out of the guide. If so, make sure that the bearing on the left
is aligned with the slot (C) facing down (towards the front door).
c. Improperly aligned bearings or seated shafts may cause vibration and noise in
the front door.
B

Lexmark C543dn Specifications

General

Brand	Lexmark
Model	C543dn
Category	Printer
Language	English