Lexmark C543dn Service Manual

4-52 Service Manual
5025-2xx, 4xx
Go Back
Previous
Next
4. Remove the LVPS.
Warning: If you receive a new low-voltage power supply with a voltage selector switch (C), be sure to set the
switch to the correct setting for your voltage requirements before installing the low-voltage power
supply. The switch can be set for either 115 V or 230 V. Failure to do so could result in damage to
the power supply.
Note: If there is no switch, the LVPS automatically senses the line voltage.

Lexmark C543dn Specifications

General

Brand	Lexmark
Model	C543dn
Category	Printer
Language	English