Transport
7.1 Transport with transport vehicle
7 - 2 3 302 690 en Operating manual
GMK4100L-1
23.11.2017
7.1.1 CHECKLIST: Checks before transport
H
This checklist is not a complete operating manual. There are accompanying
operating instructions which are indicated by cross-references.
Observe the warnings and safety instructions specified here!
1. For on-road driving without a dolly
– All telescopic sections are interlocked; the telescoping cylinder is
locked with telescopic section
I.
– The boom must be resting in the boom rest.
– The slewing gear is switched off;
à p. 11 - 120.
– The superstructure is locked;
à p. 11 - 15.
– Depending on the driving mode, the counterweight must be
unrigged;
à p. 6 - 1, à p. 12 - 69.
– If the base plate is being transported on the
rear counterweight plat-
form, lock the counterweight platform;
à p. 12 - 96.
2. On the outrigger
– All outrigger beams must be fully retracted and secured to prevent
extension;
à p. 12 - 44.
– The outrigger pads are in the driving position;
à p. 12 - 51.
3. All mirrors for crane operation are folded in/removed;
à p. 12 - 130.
The spotlight is turned downwards (if present);
à p. 11 - 130.
The lighting on the outrigger must be switched off;
à p. 12 - 43.
To Next Page
Loading...
Need help?
General
