Crane operation
11.7 Working range limiter
11 - 146 3 302 690 en Operating manual
GMK4100L-1
23.11.2017
11.7.5 Switching monitoring functions on/off
After turning on the ignition, all monitoring functions are switched on that
were on before the ignition was turned off.
H
When monitoring is switched on, the movement towards the shutdown
limit is continually reduced until reaching a standstill. The currently enabled
speed range is displayed visually;
à p. 11 - 136.
Select the symbol for switching the desired
monitoring on/off.
• Confirm the selection with button (5) or (6).
Monitoring on/off display
1 Slewing angle
2 Overall height
3 Working radius
4 Hoist rope travel limitation
7 switch on
8 Switch off
Displayed: Monitoring switched on
Hidden: Monitoring switched off
G
Danger of accident due to incorrectly set limit values!
After switching on the monitoring function, slowly approach all limits and
check that the system switches off in time.
If necessary, enter new values with larger safety distances.
To Next Page
Loading...
Need help?
General
