Starting/switching off the engine – for crane operation
10.2 Starting the engine – from the crane cab
Operating manual 3 302 690 en 10 - 7
GMK4100L-1
23.11.2017
10.2.6 Starting the engine
This section pertains to starting a warm and cold engine.
• Do not press the accelerator.
• Turn the ignition key to position 1.
• Press button (1) upwards.
• Let go of the button after the engine starts.
After starting, the idling speed corresponds to the standard value.
If the engine does not start, release the ignition key after approx. 15 seconds
and wait one minute before trying again.
H
To set the idling speed; Ã p. 10 - 9.
If the engine does not start after several attempts;
à Malfunctions on the
engine
, p. 8 - 19.
S
Danger of explosion when using starter fuel
The engine may never be started with the aid of starter fuel. The starter fuel
sprayed into the intake manifold can ignite.
To Next Page
Loading...
Need help?
General
