Rigging work
12.7 Outriggers – Overview – MAXbase slewing range type
Operating manual 3 302 690 en 12 - 33
GMK4100L-1
23.11.2017
12.7.2 Representation in the lifting capacity tables
The outrigger span is always specified in this form
Outrigger length xxxx – outrigger width yyyyy
– The value xxxx is always 8.660 m (28.4 ft).
– The value yyyy depends on the type of outrigger span.
A distinction is made between four types.
Symmetrical
The outrigger width is the same for all outrig-
ger beams. The overall width is entered once.
For example
Right / Left
The outrigger span is the same at the left side
and the same at the right side – but different
between the right and left sides.
The individual widths for the front and for the
rear are entered. For example
Front / rear
The outrigger width is the same at the front
and the same at the rear – but different
between the front and rear.
The overall width is entered for the front and
for the rear. For example
s
Outrigger width 7.200 m (23.6 ft)
Front outrigger span 3,600 + 2,650 m
(11.8 + 8.7 ft)
Rear outrigger span 3,600 + 2,650 m
(11.8 + 8.7 ft)
Front outrigger span 5.300 m (17.4 ft)
Rear outrigger span 7.200 m (23.6 ft)
To Next Page
Loading...
Need help?
General
