Rigging work
12.11 Other rigging work
Operating manual 3 302 690 en 12 - 129
GMK4100L-1
23.11.2017
12.11 Other rigging work
12.11.1 Railings on the turntable
The turntable is equipped with fixed handrails or extendable/retractable
handrails, depending on the version.
Always fold out the railings when you are working above on the turntable.
Always fold in the railings before driving.
(A) – Sliding out
• Fold the handrail (1) upwards until the
bolt (2) latches into place.
(B) – Sliding in
• Open the locking bolt (2).
• Fold the handrail (1) in until the bolt (2)
latches into place.
G
Risk of accidents if railings are not pushed out!
The railings provide protection from falling. Always fold out the railings
before stepping on to the turntable.
G
Risk of accidents due to exceeding the permissible dimensions!
Fold in the railings before driving. When the railings are unfolded, the
overall height specified for on-road driving is exceeded.
To Next Page
Loading...
Need help?
General
