Driving with a rigged truck crane
13.5 Driving from the crane cab
13 - 24 3 302 690 en Operating manual
GMK4100L-1
23.11.2017
Automatic separate steering
Symbol (1) or (2) is displayed
• Steer the 1st and 2nd axle lines with the button (3).
The axle lines are steered as long as you keep the button pressed or until an
end position is reached.
The electronics will register the steering angle on the 1st and 2nd axle lines
and steer the wheels of the 3rd and 4th axle lines correspondingly.
(A) – When driving around corners
The 3rd and 4th axle lines are steered in line
with the turning radius, contrary to the steer-
ing angle of the 1st and 2nd axle lines.
(B) – For crab travel mode
The 3rd and 4th axle lines are steered in the
same direction as the 1st and 2nd axle lines.
– To turn to the left:
• Press the button (3) left.
– To turn to the right:
• Press the button (3) right.
To Next Page
Loading...
Need help?
General
