Software Version
Purely informational Software Version screens provide the following:
• Application version and part number
• Operating system version and part number
• Boot loader version and part number
• Software version
Oil Change Reset
Rest the oil change clock using the Oil change Reset Screen.
An Oil Change alert is displayed the first time after 10 engine hours.
Subsequent alerts are displayed at 50 engine hour intervals.
Dealer Service Reset
Service is required for the engine every 100 hours. When 100
engine hours has been reached, an alert is displayed to perform
maintenance service on the engine.
NOTE: To enter the dealer code, use the up
and down arrow soft keys, then press the Next soft key. Press the
OK soft key when finished.
NOTE: To enter the dealer code, use the up and down arrow soft keys,
then press the Next soft key. Press the OK soft key when finished.
Engine Diagnostics
When choosing this selection, the display will query the engine(s)
ECU, as illustrated below, and provide feedback on any diagnostic
codes that have been activated and stored in the ECU for service
needs.
To Next Page
Loading...
Need help?
General
