Ensure that any product used is specifically indicated for use on
aluminum. (Many cleaners are too harsh and will result in pitting or
other damage to the wheel surface.) Many car washes use strong
chemicals and should be avoided when that is the case.
Removing road film, contaminants and brake dust (all of which
retain moisture) is critical to ensuring that the wheels will retain
their luster and quality finish for a long period of time. Any exposure
to a harsh winter climate, particularly road salt and/or chemicals, or
submersion in salt water at any time, requires immediate cleaning.
NEVER CLEAN WHEELS THAT ARE HOT.
Allow wheels to cool or cool them with running water. If the wheels
are too hot, significant damage can occur to the wheels.
Wheels must always be cool or cold to the touch prior to cleaning.
Failure to allow wheels to cool sufficiently can result in damage
that is not covered under warranty.
It is also important to seal the wheels with a sealant that reduces
static and resists brake dust. Check at an automotive supply store
for an appropriate sealant.
Lug Nuts or Wheel Bolts
Loose wheel mounting nuts (lug nuts) can cause more than just an
annoying wheel wobble—it’s possible to lose a wheel. Before each
trip check for loose or missing lug nuts/wheel bolts.
Ensure that all lug nuts are secure prior to every time the trailer is
towed. Failure to do so can ultimately cause a wheel to disengage
from the hub. This can cause damage to the trailer that may not
be covered under warranty, and serious injury or even death to the
driver, any passengers and/or other motorists.
When tightening the lug nuts, use the correctly sized wrench. The
wrong size can round off the lug nuts and render them useless. If
you lose a lug nut, replace it promptly. The correct size varies with
To Next Page
Loading...
Need help?
General
