CURRENT POSITION—The position of the boat. A track begins re-
cording from the current position and continues to record until the
track is cleared or saved.
CREATE WAYPOINT—Touch this button to create a waypoint at the
current position of the cursor on the map. When this button is
touched a keyboard is displayed to type a name for the waypoint.
When [DONE] is touched, the waypoint is placed on the map and
can be managed through the Waypoint Manager.
CLEAR TRACK—Touch this button to clear the currently recording track.
SAVE TRACK—Use this button to save the currently recording track.
When this button is touched, a keyboard is displayed to type a name
for the track. When [DONE] is touched, the track is diagramed on
the map.
MAIN MENU OPTIONS
Menu Options
The Menu is displayed by pressing and holding [MENU]. The follow-
ing features are available:
GPS Utilities—Contains options to set up track and position, chart
and time, and waypoint manager. Also displays satellite status.
User Settings—Allows you to customize the display options for am-
bient light and brightness, set U.S. or metric units, specify the Home
screen and screen set-up status.
Engine Diagnostics—Displays a list of engine fault codes and de-
scriptions; on some engines, corrective action will be shown.
Utilities—Allows configuration of the unit including wire configura-
tion, plug address, fault conversion, CAN data, and fault codes. Also
displays software version information at the top of the page.
To Next Page
Loading...
Need help?
General
