2016 OWNERS MANUAL / 0269
Routine maintenance is not required beyond occasionally checking
the lines and head to be certain these elements are not damaged in
any fashion, and that the hose continues to be in good condition. Be
certain to follow the Storage & Winterization section’s instructions
found elsewhere in this Owner’s Manual.
Troubleshooting
If the shower and/or wash down do not work when the switch is
turned ON, verify at the main circuit breaker panel that the circuit
has not tripped. Repeated tripping or if the system does not work
when the circuit is on indicates a problem that requires the atten-
tion of an authorized MasterCraft dealer. The pump is not located
in a consumer-accessible location. Also verify that the wand has no
obstructions at the head that would prevent proper operation and
that the line is not kinked, thereby inhibiting the flow of water.
SEAT HEATERS
Models
Optional on all models for driver’s seat; certain models for observ-
er’s seat.
Purpose
The seat heat option allows the equipped seats to be warmed to
temperatures above those of the ambient air.
Location
The electrical seat-heat mechanisms are located inside equipped
seats. The seat heat switch is on the driver’s armrest. In some
models, an optional observer seat heat switch is available and will
be found on the deck below the observer seat cushion.
Operation
A two-position switch allows heat to be turned ON for the driver’s
seat. Note that this switch and the observer’s seat heat switch will
operate only when the ignition is in the ON position.
To Next Page
Loading...
Need help?
General
