2016 OWNERS MANUAL / 0347
• Lubricate the throttle and shift cables.
• Check the engine mounts.
• Inspect the complete fuel system for leakage.
• Check the fire extinguisher and suppression units on-board.
• Change impellers.
Details follow in the next few sections.
MasterCraft recommends using an authorized MasterCraft techni-
cians at an authorized MasterCraft dealer for many of these tasks!
SCHEDULED MAINTENANCE
Before Each Use
Prior to Starting the Engine
Review the Safety Checks and Services section of this Owner’s
Manual. There are important functions that must be followed before,
during and after every outing, without fail! The Safety Checks and
Services notes that all drain plugs must be reinstalled prior to oper-
ating the boat!
Inspect Seacock Strainer
Because a clogged seacock strainer puts undue strain on the
engine(s), the strainer should be checked prior to starting the boat.
The seacock strainer is standard on all boats.
Step 1
Open and lift the cover.
Step 2
Remove the filter and inspect for debris. Manually clean the strainer.
Step 3
Check for debris and remove any that is inside the sea strainer.
Step 4
Return the lid and tighten in place.
To Next Page
Loading...
Need help?
General
