2016 OWNERS MANUAL / 0317
Stopping
• Step 1: Slowly bring the control lever to the neutral position. If the
boat has been driven for a long period of time or at high speed,
allow the engine a two-to-three (2-3) minute cool-down period at
low idle (600-800 RPM).
• Step 2: Press the ENGINE START-STOP button.
• Step 3: At the conclusion of the outing, turn the key off and
remove from the key slot. Turn the battery switch to “Off”. Doing
so will ensure that you have turned OFF the electrical system, and
prevent others people from starting or running the boat.
• Step 4: If any problems were encountered during operation, have
the boat inspected by an authorized MasterCraft dealer. Request
any necessary repairs before resuming operation of the boat.
To Next Page
Loading...
Need help?
General
