To Next Page

To Previous Page

2016 OWNERS MANUAL / 0131

Touch [UP ARROW] or [DOWN ARROW] to change the Set Speed

settings.

Touch [RIGHT ARROW] to move to the Ballast screen or [LEFT AR-

ROW] to return to the Name screen. Touch [EXIT] to exit the screen

and return to the Proﬁle Menu.

The ballasts are set by touching the ballast tank you want to set and

sliding your ﬁnger on the screen to the desired setting. While the bal-

last ﬁll indicator is red, the ballasts are not full. When they are full, the

ballast ﬁll indicator turns green. Touch the [RIGHT ARROW] to move

to the Tabs screen or [LEFT ARROW] to go back to the Speed screen.

Touch [EXIT] to exit the screen and return to the Proﬁle Menu.

Touch [MINUS] button to decrease the percentage, or the [PLUS]

screen to increase the percentage of tab adjustment. When the sat-

isfactory level is reached, touch the [RIGHT ARROW] to move to the

Proﬁles save screen or the [LEFT ARROW] to move to the previous

Ballast screen.

Touch [EXIT] to exit the screen

MasterCraft X23 User Manual

Questions and Answers: