TRANSOM/SWIM
PLATFORM CANVAS
Models
X2, X10, X20, X23, X26, X30, and XStar, as an option with the “Un-
der-tower Mooring Cover”
Purpose
Cover and protect the swim platform from the elements.
Location
Attached to the mooring cover and over the swim platform
Operation
Utilize the Velcro flaps connected on the swim platform cover and
the aft portion of the mooring cover to attach the two pieces togeth-
er. Open the flap on the mooring cover, insert the flap of from the
swim platform cover and sandwich the two together, pressing firmly
to ensure a tight attachment. Once all flaps are connected, pull the
platform cover over and around the aft section of the swim platform.
Pull the drawstring under the cover to tighten.
NOTE: The transom/swim platform canvas is purposely loose in
order for the operator to be able to step on the canvas for installa-
tion/removal.
The transom / swim platform canvas must be removed before
trailering, as it may damage gel coat.
ENGINE FLUSH
To Next Page
Loading...
Need help?
General
