Settings
37
Changing factory default
settings
Your appliance is supplied with a
number of standard default settings
(see the "Settings overview" chart).
A setting is changed by altering its
status.
Settings can only be changed when
the oven is switched on and the rotary
selector is at .
Select .
If necessary, use the rotary
selector to move the triangle
until it appears under.
Confirm with OK.
A setting will appear:
If you wish to change another setting,
use the rotary selector to select
the appropriate number.
Confirm with OK.
The setting is selected and the current
status appears, e.g.
To change the status:
Use the rotary selector to select
the status you want.
Confirm with OK.
The selected status is saved and the
setting appears again.
If you want to change further settings,
proceed as described above.
Select if you have not changed
one setting and wish to switch to
another.
If you do not want to change any
further settings, select .
The settings remain in the memory
even after a power cut.
To Next Page
Loading...
Need help?
General
