Moisture Plus
60
Starting residual moisture
evaporation immediately
Select the Moisture Plus function.
A time, depending on the amount of
residual water present, will appear and
the triangle will flash under :
Confirm with OK.
The evaporation process will begin. The
duration will count down in the display.
During the evaporation process, the
duration may be adjusted by the system
according to the amount of water
currently present.
The last minute counts down in
seconds.
At the end of the residual water
evaporation process appears:
A cooking process using the Moisture
Plus function can now be carried
out.
To Next Page
Loading...
Need help?
General
