Moisture Plus
56
Cooking with the Moisture
Plus function
It is quite normal for condensation to
form on the inside of the door during
steam injection. This will dissipate
during the course of the cooking
programme.
Prepare the food and place in the
oven if no pre-heating is required.
Fill a suitable container with the
amount of water required:
Approx. 100 ml
Approx. 100 ml
Approx. 200 ml
Approx. 300 ml
Select the Moisture Plus function.
Setting the number of bursts of
steam
will appear in the display with the
triangle flashing under.
The other steam burst options (, , )
can be selected using the rotary
selector.
After , appears in the display. This
option starts the descaling process
(see "Descaling the steam injection
system").
Useful tip: Use the recipes as a guide.
If you want the oven to release a
burst of steam automatically after the
heating-up phase, select and
confirm with OK.
If you want to inject one or more
bursts of steam manually at specific
times, select , or and confirm
your choice with OK.
Setting the temperature
The recommended temperature will
appear in the display with the
triangle flashing under :
If necessary, set the temperature
using the rotary selector.
Confirm with OK.
To Next Page
Loading...
Need help?
General
