Mindray Z60T User Manual

6-2 Display & Cine Review
3. Exit:
 Press <Depth/Zoom>.
 Unfreeze the image, the system exit pan zooming status automatically.
6.1.2.3 iZoom (Full-screen Zooming)
Function: to magnify the image in full screen.
According to the region to be zoomed, the system supports two types of full-screen
zooming:
 Zoom in the standard area to full-screen, including image area, parameter area,
image banner, thumbnail area and so on.
 Zoom in the image area only to full-screen.
 Procedures:
1. Set the User-defined key:
(1) Press <Setup> to enter [Setup] -> [System Preset] -> [Key Config].
(2) Select a function-free key in the function list.
(3) Select "iZoom" in the "Other" page.
(4) Click [Save] to complete the setting.
2. Open the image(or the under scanning image), press the user-defined iZoom key once to
zoom in the standard image area; and then press the key again to zoom in the image
area only.
3. Press the user-defined key again to return to normal status.
 The iZoom status supports:
 Measurements, adding comments and body marks.
 Video output, saving image and printing the current area that is zoomed in.
 Exiting the zooming status by pressing <Probe>, <Patient>, <iStation>, <Review> or
<Setup>.
6.1.3 Freeze/ Unfreeze the Image
Press <Freeze> on the control panel to freeze a scanning image. In freeze mode, the probe
stops transmitting acoustic power, and all images as well as the parameters are kept still.
Tip: after freezing an image, the system may enter cine review, measure, comment adding, or
body mark mode, which is dependent upon preset. (Setting path: [Setup]→[System Preset]→
[Image]→"Freeze Config")
Press <Freeze> in freeze mode to unfreeze the image, the system continues image scanning.
6.1.3.1 Imaging Mode Switching When Frozen
Imaging mode switching in freeze mode follows the following principles:
 In splitting display B mode, press <B> to exit splitting display mode and display the
image of the currently activated window in full screen.
 In freeze mode, the system supports imaging mode switching between the sub-
modes (only for the activated window).
 The imaging mode and parameters of an unfrozen image is the same as the
corresponding one that before frozen; but the display format is the same as the one
before unfrozen.

Mindray Z60T Specifications

General

Brand	Mindray
Model	Z60T
Category	Diagnostic Equipment
Language	English