Mindray Z60T User Manual

9-2 Comments and Body Marks
 ABC Display
Click [ABC Display] to display or hide the added comments. Assign the user-defined key
for the function in “[Setup]-> [System Preset]->“Key Config” ”.
 Set comment language
Click [English] to turn on or off the English comments. If “English” is turned on, the
comments will display in English; if turn off, the comments will display in the language you
set.
If the current language is English, this selection is not available.
 Custom
Click [Custom] to display the dialog box containing all comments in current menu, you
can edit the comment.
9.1.3 Adding Comments
The system can be configured with comment text libraries including Abdomen, Cardiology,
GYN(Gynecology), OB(Obstetrics), Urology, SMP(Small Part), Vascular, PED(Pediatric) and
Nerve Blocks.
 Typing comment characters
1. To set the comment location:
Roll the trackball or press direction-control keys on the keyboard to move the cursor to
the desired location for comments.
2. To type the alphanumeric characters:
 Type the alphanumeric characters through the qwerty (The default characters are
uppercase);
 To type the upper characters, press [Shift] and the character key at the same time.
3. Move to a new line:
In the edit status (the characters are in green color), press <Enter> to move the cursor to
the new line, and the location of the cursor is aligned with that of the first line.
4. In the edit status, move the trackball or press the multifunctional knob to confirm the
character added, and the color of the character added turns yellow.
 Adding a Comment Text
Move the cursor onto the desired comment text in the menu and press <Set> or the
multifunctional knob, and then the system adds the selected comment text on the set
location. The added comment text is in the edit status, so you can edit the comment
text added.
 Add combined comment: Rotate the knob to view the comments one by one; press
the knob again to add the selected item onto the image(comment added in an
editable state); rotate the multifunctional knob to search for the next part, and press
the knob again to add the second part of the combined comment. Repeat procedures
to add other parts of a combined comment. Press <Set> to complete the comment.
 Adding an Arrow
You can add an arrow to a location where you want to pay attention.
1. Press the <Arrow> key, and an arrow will appear at the default position.
2. Adjust the arrow
 Adjust the position and orientation of the arrow: roll the trackball to the desired
position and use the multifunctional knob to change the orientation in 15° increments.
 Click [Arrow Size] on the menu to change the arrow size:
3. Press <Set> or <Enter> to anchor the arrow position, and then the arrow turns yellow.
4. Repeat the above steps to add more arrows.

Mindray Z60T Specifications

General

Brand	Mindray
Model	Z60T
Category	Diagnostic Equipment
Language	English