11-2 DICOM
11.1 DICOM Preset
11.1.1 Network Preset
DO Not edit IP address in Network Preset page as the network task is executed,
otherwise it fails. View if there is any undergoing task in task manager of the system.
Preset local TCP/IP settings.
1. Press <Setup> to enter the [Setup] menu.
2. Select [Network Preset].
3. Local TCP/ IP preset items are described as follows:
To select network connection mode.
DHCP
/ Static
DHCP: IP address will be automatically obtained from DNS server;
Static: you need to enter the IP address.
IP address of the system.
Subnet Mask Used to set different network segment.
Used to set the gateway IP.
Note:
The IP address of the system should not be occupied by other devices in the network,
or the DICOM function will fail.
After you changed “Station Name”, you need to restart the system to make the setting
effective (press the power button and select “Shut Down” and restart the system after
a while).
To Next Page
Loading...
Need help?
General
