Mitsubishi Electric MELFA RV-7FRL-D User Manual

3-54 Installing the operating range change (RV-2FR series)
3Installing the option devices
(5) Check the operating range
After changing the parameter, turn off the controller power and turn on again. And, move the axis changed by joint
jog operation to the limit of the operating range. Confirm that the robot stops by limit over at the changed angle.
The changing of the J3 axis operating range is completed.

Mitsubishi Electric MELFA RV-7FRL-D Specifications

General

Brand	Mitsubishi Electric
Model	MELFA RV-7FRL-D
Category	Robotics
Language	English