Motorola MC2100 User Manual

CHAPTER 5 WIRELESS APPLICATIONS
Introduction
Wireless Local Area Networks (LANs) allow mobile computers to communicate wirelessly and send captured
data to a host device in real time. Before using the MC21XX on a WLAN, the facility must be set up with the
required hardware to run the wireless LAN and the MC21XX must be configured. Refer to the documentation
provided with the access points (APs) for instructions on setting up the hardware.
To configure the MC21XX, a set of wireless applications provide the tools to configure and test the wireless
radio in the MC21XX. Refer to the Wireless Fusion Enterprise Mobility Suite User Guide for Version X1.00 for
information on configuring wireless profiles. Go to
http://www.motorola.com/enterprisemobility/manuals for the
latest version of this guide. See Software Versions on page ii to determine the Fusion version on the MC21XX.
Tap the Signal Strength icon to display the Wireless Launcher menu.
NOTE MC2180 only.
NOTE 802.11d is enabled by default. When enabled, the AP must be configured the same in order to
connect.
PRELIMINAR
ARY
AR
CATIONS
allow mobile compute
allow mobile compute
efore using the MC21
efore using the MC21
eless LAN and the MC
ess LAN and the M
ts (APs) for instruction
) for instruct
he MC21XX, a set of w
he MC21XX, a set of
MC21XX. Refer to th
MC21XX. Refer to th
on on configuring wire
on on configuring wire
version of this guide.
sion of this guide.
ap the
ap th
Signal Streng
Signal Str
d is enabled by defaul
d is enabled by defau
ect.
ect.

Motorola MC2100 Specifications

General

Brand	Motorola
Model	MC2100
Category	Handhelds
Language	English