9.3 Clearing Sections
You can clear a Section from your Project using MASCHINE JAM. When a Section is cleared it
is removed (deleted) from the Project, however, the Scene and its Patterns still remain availa-
ble.
On your controller, do the following to clear a Section:
1. Press the SONG button so it is lit.
⇨ Arranger view is now active and you have an overview of your Sections (1-8).
2. Press and hold CLEAR.
3. Press the Section button (1–8) you want to delete.
→ The Section is removed from the Project. If your Project contains more than eight Sec-
tions, press SHIFT + Section button (1–8) to access the Section bank.
9.4 Looping Sections
Loop allows you to repeat any number of Sections (a section of your track). This can be useful
for listening to a section of a track on repeat while composing, or used as a performance tool.
To set a Loop range:
1. Press the SONG button so it is lit.
⇨ Arranger view is now active and you have an overview of your Sections (1-8).
2. Press SHIFT + Page Right button (LOOP) to enter Loop mode.
⇨ The Section buttons will illuminate.
Arranging Your Song
Clearing Sections
MASCHINE JAM - Manual - 134
To Next Page
Loading...
Need help?
General
Weight and Dimensions
