1. Press SELECT + click-pad (1–16) containing the Sound you want to sequence.
2. Select a velocity for the Sound. In one Sound Step mode, the illuminated lower left quad-
rant of the 8x8 click-pad matrix controls velocity for entered steps (lowest value in the
lower left corner, highest value in the upper right corner). The selected velocity is brightly
lit.
3. Activate each step by pressing a click-pad once.
⇨ The click-pads illuminate to represent each entered step. If you press an illuminated
click-pad the step is removed. This way it’s quick and easy to create a drum pattern.
4. Press SHIFT + SELECT (ACCENT) to add an accent to the step.
⇨ New steps are now be audibly more pronounced and the click-pads will be brighter to vis-
ually signify the step is accented. The controller will remain in Accent mode until you
press SHIFT + SELECT (ACCENT) again. Please note, if an accent has been placed on a
step that this will override any selected velocity setting.
5. Press PLAY to start the sequencer.
Recording and Editing Patterns
Playing and Programming Beats
MASCHINE JAM - Manual - 84
To Next Page
Loading...
Need help?
General
Weight and Dimensions
