The PRESET MODES page displays.
5. Select GAMING PRESET.
The PREVIEW GAMING PRESET section shows the settings for the Gaming Preset mode.
6. Click the APPLY button.
Your settings are saved.
Apply the Media Streaming Preset Mode
The Media Streaming Preset mode maximizes the throughput of traffic that the switch manages so that
streaming media such as music, videos, and movies can be processed very quickly. If you use the Media
Streaming Preset mode, be sure that you connect the uplink to your router to port 1 and your media streaming
device to port 9.
Applying the Media Streaming Preset mode does the following:
• Sets the QoS port priority for ports 1 and 9 to High(P7) (for more information, see Set the Priority for a
Port on page 35).
• Sets the QoS port priority for ports 2 through 8 and port 10 to Low(P0) (for more information, see Set
the Priority for a Port on page 35).
• Enables IGMP snooping for the switch (for more information, see Manage IGMP Snooping on page 55).
• Disables flow control for all ports (for more information, Manage Flow Control for a Port on page 36).
• Disables power saving for the switch (for more information, see Manage the Power Saving Mode on
page 68).
• Sets the QoS mode to Port-Based (for more information, see Use Port-Based Quality of Service and
Set Port Priorities on page 31).
• Disables rate limiting for all ports (for more information, see Set Rate Limits for a Port on page 35).
• Sets the LEDs to the streaming color scheme (for more information, see Manage the LEDs on page
69).
Before you apply the Media Streaming Preset mode, you can save your current QoS, port prioritization,
multicast, flow control, and IGMP snooping settings and other settings as a custom preset mode (see Save
Your Quality of Service Settings as a Custom Preset Mode on page 28) so that you can easily revert to your
current QoS configuration.
To apply the Media Streaming Preset mode:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. Select PRESET MODES.
Optimize the Switch Performance
25
Nighthawk Pro Gaming SX10 Switch Model GS810EMX
To Next Page
Loading...
Need help?
General
