Table 4. Factory default settings (Continued)
Default SettingFeature
EnabledPower LED
Standard color scheme. In the Standard Preset mode (which is the default mode),
the switch uses a color scheme with a purple and dark blue color palette.The Power
LED is orange.
LED color scheme
Other features
No VLANs configured
VLANS configurable in access mode or trunk mode
VLANs
No LAGs configured, LACP enabledLink aggregation
DisabledPower saving mode
EnabledLoop prevention
DisabledPort mirroring
Enabled (nonconfigurable)Jumbo frames
Basic Technical Specifications
The following table shows the basic technical specifications of the switch.
For more specifications, see the data sheet that you can download by visiting downloadcenter.netgear.com.
Table 5. Basic technical specifications
DescriptionFeature
Two RJ-45 ports (ports 1 and 2) supporting 100BASE-TX, 1000BASE-T,
2.5GBASE-T, 5GBASE-T, or 10GBASE-T
Eight RJ-45 ports (ports 3 through 10), supporting 10BASE-T, 100BASE-TX, or
1000BASE-T
Network interfaces
For 100 Mbps, use a Category 5 (Cat 5) or higher-rated cable.Network cable
For 1 Gbps, 2.5 Gbps, or 5 Gbps, use a Category 5e (Cat 5e) or higher-rated cable.
For 10 Gbps for up to 55 meters (180 feet), use a Category 6 (Cat 6) or higher-rated
cable.
For 10 Gbps for more than 55 meters (180 feet), use a Category 6A (Cat 6A) or
higher-rated cable.
Input: 100–240 VAC, 50–60 Hz (The plug is localized to the country of sale.)
Output: 12V, 2.5A
Power adapter
Factory Default Settings and Technical Specifications
83
Nighthawk Pro Gaming SX10 Switch Model GS810EMX
To Next Page
Loading...
Need help?
General
