NXAMPMK2 USER MANUAL PAGE 13 / 80
FRONT PANEL DESCRIPTION
The NXAMPmk2 features a color 4.3 inches touch screen display and a pushable rotary encoder with a
surround backlight.
A: AIR INTAKES
The NXAMPmk2 uses forced-air cooling. The variable speed cooling fan draws air in from the front and
exhausts it through the rear. Please be sure that you do not block the air intakes or exhaust vents.
B: 4.3 INCHES COLOR TOUCH SCREEN
The large tactile screen is used for the display of the amplifier settings and status. Use the Up/Down arrow
to navigate into the menus, select an area to adjust a parameter and turn or press the encoder accordingly.
C: ROTARY ENCODER
The rotary encoder is used to start the amplifier, navigate in the menus, and validate values by pressing it.
Once all the wiring has been done and mains is present, the surround backlight of the encoder is glowing
slowly. Long press this encoder till the system boots up. The first screen will show the NEXO logo and the
See Start-up & Menu Operations section for more information.
BACK PANEL DESCRIPTION
To Next Page
Loading...
Need help?
General
