Nexo NXAMP4x2mk2 User Manual

NXAMPMK2 USER MANUAL PAGE 9 / 80
Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force on the
buttons, switches, or connectors.
Do not use this device for any purpose other than driving loudspeakers.
Rapidly turning the unit on and off in succession can cause it to malfunction. After turning the unit off, wait
for more than five seconds before turning it on again.
WARNING!
This mark indicates a dangerous electrically live terminal. When connecting an external wire to this

make the connection or to use leads or a cord that have been manufactured in such way that the
connection can be made simply and without problem.

FCC INFORMATIONS (U.S.A.)
IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by NEXO-SA may void your authority, granted by the
FCC, to use the product.
IMPORTANT
When connecting this product to accessories and/or another product use only high-quality shielded cables.
Cable(s) supplied with this product MUST be used. Follow all installation instructions. Failure to follow
instructions could void your FCC authorization to use this product in the USA.
NOTE
This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15
for 
that your use of this product in a residential environment will not result in harmful interference with other
electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according
to the instructions found in the user manual, may cause interference harmful to the operation of other
electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in

problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter(s).
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 Ohms
ribbon lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized
to distribute this type of product. If you cannot locate the appropriate retailer, please contact the After Sales
department of NEXO-ctivité du Pré de la Dame Jeanne, B.P.5, 60128 PLAILLY, FRANCE.

Nexo NXAMP4x2mk2 Specifications

General

Brand	Nexo
Model	NXAMP4x2mk2
Category	Controller
Language	English