NXAMPMK2 USER MANUAL PAGE 39 / 80
By clicking on (1), you can select an averaging time (5 min to 1 week) for the measurements.
By clicking on (2), you can reset all the data in the Log file after confirming with the following popup.
The two arrows in area (3) can be used to navigate between global parameters and per-channel parameters,
described below.
GLOBAL PARAMETERS
The global parameters than can be logged are the followings.
• MAINS1 and MAINS2 (NXAMP4x4mk2 only) Voltage.
• Power Supply1 and Power Supply 2 (NXAMP4x4mk2 only) Voltage.
• Analogue Input Level A, B, C or D.
• Digital Input Level E, F, G or H.
• Overmute.
• Amp Protection by Limiting or Muting Outputs.
PER-CHANNEL PARAMETERS
• Power Amp Temp.
• Output Voltage and Current.
• Sense, Protection and Clip limiter action.
• Channel Mute.
• Speaker temperature, displacement, and protection.
Detail of these parameters can be found in Log and Alert Parameters section.
To Next Page
Loading...
Need help?
General
